Iota DLS 27-40 40A 24V 2-Stage AC Charge Center

DESCRIPTION

Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 27.2 DC voltage for both DC load operation and 24V battery charging.

As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 24VDC load up to 40 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-27-40 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells. DLS-27-40 Battery Charger/Power Converter

MODELS DLS-27-40

The DLS-27-40 provides AC/DC conversion up to 40 amps and features a allowing the user to manually select between a nominal charging voltage of 27.2 or a stepped-up charging voltage for faster battery charging.

DLS-27-40/IQ4
The DLS-27-40/IQ4 features an internal IQ Smart Charge Controller which automatically provides three-stage battery charging for safer charging and longer life for your system's battery.

SPECIFICATION :

DC Output Voltage (No Load) approx.27.2V (DC)

Output Voltage Tolerance (No Load)+ or - .5%

Output Amperage, Max Continuous 40 Amps

Output Voltage (Full Load) approx. 27.0V (DC)

Maximum Power Output, Continuous    1100 Watts

Ripple and Noise      50 mV rms

Input Voltage Range     108-132V (AC)

 Input Voltage Frequency       47-63

Maximum AC Current @ 108VAC    20 Amps

Typical Efficiency 80%

Max Inrush Current, Single Cycle 50 Amps

Short Circuit Protection Yes

Overload Protection 100%

Line Regulation 100 mVrms

Load Regulation <1%

Fan Control    Proportional

Thermal Protection YES

Working Temperature Range 0-40C

Storage Temperature -20 to 80C

Withstand Voltage 1240V @ leads

 Dimensions 13" x 6.5" x 3.4"

Weight 7.8 lbs