Aluminum Folding Arch Ramps 2-Piece Set

7.4' Length or 10' Length x 12" Inches Wide

All of our products are made from 6005 T5 or 6061 T6 Aluminum material, all extruded here in the U.S.A.
All welding is done by our welders NOT robots.

All ramps have grovved rigid rod for traction and welded on the top of the uprights stringers for exptra support.

All ramps will have 3 to 5 uprights per half for extra strength
All ramps come with safety straps, warning labels and instruction sheet (except the ramps with angles for hooking to trailers) which does not require straps.
Every ramps comes with mfg 1 year warranty for material and workmanship.
Arched ramps are sold as a PAIR (except LRC3)
All ramp models 512 style arched trailer ramps comes standard with the angle ends for attaching your trailer with the angle on the back of the trailer.  If your trailer does not have the angle on the back then order 512 style with solid plate ends. Available in straight or arched.
The 612 style ramps are commonly used for loading ATV's as they come with the tabs on the ends to lay on the tailgates for loading
the model 712 style through the 1012 style ramps comes standard with tabs or plate ends.  Load anything with 4 wheels!

All  512 ramps through 1012 models will have a 3.5" spacing.  The largest spacing is approx. 3.25" x 4'.
Bi-Fold ramp series are all straight ramps from 400 style through 848H model ramps.
the ramp models with an (H) denotion are 1,500 lbs loading capacity.  All others are 1,000 lbs capacity.
Rigid rods are spaced on 5.5" intervals so the largest open space will be approx 5.25" x 6.5" in width.

Model number : 712 F or H
Length (overall length) : 7 ft. 4 in.
Wide : 12 in.
Loading Capacity : 1500/3000 lbs.

Other Models Available :
Model Number : 1012 F